Toy Touch Screen Kinetic Energy Tester with Printer
Product Introduction
This device comes with a printer.
The instrument is mainly used to test the kinetic energy of the projectile toy, so that the ejection component of the toy passes the test tube of the instrument or the two sensors of the external test component, and the time taken by the toy ejection component to pass a certain distance is measured, and the movement is calculated. energy. Inspect the safety performance of the catapult toy for infants or children.
Principle
The sample is injected from the front of the test channel, and the instrument automatically captures the velocity of the object and automatically records the time difference between the front and back positions of the test. Based on the measured time value and the weight of the sample, the kinetic energy value of the sample and its hazard can be calculated.
Standard
EN71-1-2011
Technical parameters
| Number of samples | 1/time |
| Screen control | Touch Screen |
| Maximum timing | 15.000000S |
| Timing range | 0.000001--15.000000S |
| Speed display range | 0.007M/S—10000.000M/S |
| Front and rear sensing spacing | 152.4mm,error0.1mm |
| Minimum diameter of sample | 3mm |
| Test save | save data |
| Volume(WxDxH) | 36x35x15cm |
| Weight (approx.) | ≈6kg |
| Power supply | 1∮ AC 220V 3A |
Special Selling point
1. Touch Screen
2. With print
3. The machine will automatically calculate the kinetic energy
4.Test save, can save data
5. Calibration function
6. Price concessions
7. Independent packaging
8. In stock, can be shipped immediately
The packing details is as below :
Dimension: 41cm*41cm*26cm(L×W×H)
Weight:8.6kg
Features
With the detection capability of bullets above 0.5mm diameter, no sensitivity adjustment is required, and it is fully automated. Enter the weight of the bullet,
Automatic calculation of bullet velocity, kinetic energy, number of times, average
Please review video of the Kinetic Energy Tester operation as below link:
https://youtu.be/Rv64fly1kNI