Memmert Weter Bath
Memmert Water Bath อ่างควบคุมอุณหภูมิ รุ่น WNB29 ฝา Slope
Description
Waterbath WNB 29
Standard delivery Waterbath
On this page, you can find all the essential technical data on the Memmert water bath. Our customer relations team will be pleased to help if you want further information. If you should require a customised special solution,
Temperature
| Setting temperature range | +10 to +95 °C and boiling stage |
|---|---|
| Working temperature range in °C | min. 5 above ambient up to +95 °C with additional boiling mode |
Control of standard components
| Temperature sensor | 1 Pt100 sensor class A in 4-wire-circuit |
|---|---|
| Timer | integrated digital timer from 1 min. to 99,59 hours for: ON continuous operation WAIT (delayed on for continuous and limited timed operation) HOLD |
Control technology
| Controller | digital display of set and actual temperature and of (remaining) programme time |
|---|
Safety
| Temperature control | mechanical temperature limiter TB protection class 1 switching the heating off at approx. 30°C above max. temperature of the bath |
|---|---|
| Temperature control | in case of overtemperature due to failure, the heating is switched off at approx. 10°C above the set temperature (fixed value) |
| Autodiagnostic system | microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator |
Heating concept
| Heating Baths | corrosion-proof large-area heating on three sides |
|---|
Stainless steel interior
| Dimensions W x H x D in mm | w(A) x h(C) x d(B): 590 x 140 x 350 mm |
|---|---|
| Interior | easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, material no. 1.4301 (ASTM 304), laser-welded |
| Volume | 29 l |
| Liquid level min. | 105 mm |
| Liquid level max. | 120 mm |
Textured stainless steel casing
| Dimensions | w(D) x h(G) x d(E): 818 x 343 x 516 mm |
|---|
Electrical data
| Voltage | 230 V, 50/60 Hz |
|---|---|
| Electrical load | approx. 2400 W (during heating) |