Vertical Drip Tester for IPX1 , X2 Test
Application
The main function of this equipment is to test the physical and other related performance of products under the conditions of simulated dripping weather for products such as electrical and electronic products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their components and parts. After the test, through the test to determine whether the performance of the product meet th e requirements in order to facilitate product design, improvement, testing and factory inspection.
Standards
IEC60529: 1989 + A1: 1999 + A2: 2013, ISO20653 Road Vehicles -
GB4208-2008 "Enclosure protection level (IP code)" 14.2.1, 14.2.2 clauses and Figure 3; GB7000.1 "Lamps Part I: General Requirements and Test" section 9.2.3 of the requirements;
VW80000-K10: IPX1, IPX2
Technical Parameters
|
Apply to the product IPX1, IPX2 test |
|
|
Drip tank |
1000 × 1000 × 50mm (length × width × height) |
|
Dripping area |
0.64m2 |
|
Precipitation |
IPX1 (1 ± 0.5mm / min), IPX2 (3 ± 0.5mm / min), the user set their own drop (error: ± 0.5mm / min) |
|
Water tank material |
stainless steel |
|
Drip aperture |
φ0.4mm |
|
Drip hole spacing |
20 * 20mm |
|
Drip tank height |
200mm ~ 2000mm (equipment automatic control adjustment) |
|
Set the range |
0s-999s (can set their own time) |
|
The test completed automatic discharge water tank water |
|
|
Rack materials |
industrial alloy aluminum |
|
Water tank type |
closed water tank (L800mm * W800mm), SUS304 |
|
The machine installation |
the use of four pillar-type structure bracket fixed on the wall |
|
Dimensions |
|