Application

Air Cooled Xenon Lamp Testing Chamber is used to determine the color fastness and aging to sunlight, weather resistance, compound color fastness to sunlight-perspiration of Geotextile, leather, leatheroid, plastic, etc, by setting various parameters of irradiance, temperature, humidity, spray to simulate natural condition in lab. Be able to control irradiance real-time, automatically inspect and compensate irradiance, temperature, humidity.

Features

1.Presetting various specifications, Custom program capability, meet diverse range of standards, including AATCC, ISO, BS, IS ,JIS etc;

2.Colorful touch screen, indicate the condition of chamber at real-time, be able to presetting irradiance, temperature (BPT, BST, chamber), humidity, and plot dynamic curve of them. The operator simply selects the required test module and test standards; English user interface, diagram indicate condition of chamber, easy to use;

3.PLC control, powerful program and storage property, save the parameters when interrupt of power supply.

4.Chamber temperature control, irradiation temperature, and heater raise the temperature, air conditioning refrigeration.

5.Custom program capability and storage for additional user-defined tests.

6.Built-in diagnostics and warnings, automatic prompt when lamp or optical filters require changing.   Multi-position sensor to supervise working condition, temperature, humidity, fan, xenon lamp, and door to chamber, it makes device work properly and reliably;

7.Use driving clutch to connect turntable and motor, it makes turntable rotate freely and put sample easily without stopping unit;

Technical parameters

Xenon lamp technical parameters temperature range RT ℃ ~ +80 ℃ light irradiance
Spectral wavelength: 290nm ~ 800nm Irradiation range of 550W ~ 1200W / ㎡,

1 Dimensions of the working chamber(mm)--(500×600×500)(W×D×H) 150L
Temp.range RT℃～+80℃ Light irradiance
Spectral wavelength: 290nm～800nm irradiance range 500W～1200W/㎡,
Temperature fluctuation ≤±0.5℃
Temperature uniformity ≤2℃
Cooling rate 0.7～1℃/min (non-linear)
Heating rate 3～5℃/min (non linear)
Humidity range 30%～98%R.H
Humidity fluctuation 3%～4% R.H
Black board temp. 63+3℃
ISO4892-2 ；ISO11341 IS 15351,IS7903
AATCC16E ；AATCC169(1)
JASOM346-93
GMW3414TM Ford Interior
ASTM G155-1 ASTM G155-4
includes two xenon lamps

Material

Outer box material, size high quality cold rolled steel plate paint
Inner box material, size imported SUS304 stainless steel deep 500 * wide 600 * high5 00mm
Insulation material quality polyurethane foam 100mm
Xenon light source water-cooled xenon lamp 3KW, life of more than 1200 hours, easy to disassemble
Light Irradiance Deviation ± 0.01W / m2
High radiation intensity control can reach 2 sun or higher levels