Martindale Abrasion and Pilling Tester
Product Introduction
This tester can check the abrasion and pilling capability for various textile products.
1. Samples are rubbed against known abradent at low pressures, its degree of abrasion and pilling can be compared with standard parameter evaluation.
2. The instruments used movable fastening components of the sample, you can always check out a sample of friction without affecting the other specimen
3. Not only the sample quickly, independent testing, also guarantees a friction over the accuracy of measurement is BSEN ISO12947-1: 1999 recognized fastening methods.
4. The tester is equipped with electronic preset batch counter, timer and pooled sample clips and load device (compatible with international testing standards) Provides 4, 6, head of the model.
Principle
Under the specified pressure, the circular specimen is rubbed with the same fabric or wool fabric abrasive fabric for a certain number of times with the Lissajous pattern trajectory, and the wear resistance and the pilling performance of the specimen are examined.
According to the standard
This tester is manufactured according to ISO 12947-1~3, ISO 12945-2, GB/T 21196.1~4, ASTM D4966 and other standards.
Technical parameters
Project | Specification |
Test station | 4 stations |
Wear resistance stroke | 60.5±0.5mm |
Pilling stroke | 24±0.5mm |
Test speed | External wheel: 47.5±2.5r/min, inner wheel: 44.5±2.4r/min |
Test pressure Wear resistance | 595 ± 7g / 795 ± 7g, hair ball: 415 ± 2g |
Flattening weight | 2.5±0.5kg, diameter 120±10mm |
Controller | PLC touch screen control |
Volume (WxDxH) | 48x50x36cm |
Weight (approx.) | ≈50Kg |
Power Supply | 1∮ AC 220V 3A |
Why does pilling happen?
What causes fabric pilling on clothes? These pesky fabric pills are the result of normal wear and tear—broken clothing fibers on the surface become tangled together. Over time, these threads clump together, forming the characteristic lint ball that is stuck to your clothing.