Approved by CE certificate, ensure the safety operation of the machine. Certificate No.: GB/1067/3980/12 Issue 1.

SHL-100 Pen type Leeb hardness tester according to the Leeb hardness measurement principle can be easily and quickly measure a variety of metal materials, and instantly display the value of measured hardness. And it can swiftly convert the hardness value in different hardness scales.

1. Technical parameters :
 1) Measuring range:
     (170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(30-100)HS,(59-85)HRA(13 -100)HRB
 2) Measuring direction:
     Support 360º testing (Vertically downward, oblique, horizontal, oblique, straight up)
 3) Hardness scale:
     HL、HB、HRB、HRC、HRA、HV、HS

 4) Display:
     High resolution dot matrix LCD, LED backlight
 5) Data storage:
     Max 500 groups (relative to impact times 32~1)
 6）Working power:
     3.6V (built-in lithium battery and charging circuit)
 7) Continuous working period: about 100 hours(With backlight off)
 8) Communication interface: USB1.1

2. Applicable to materials
    Steel and cast steel, alloy tool steel, stainless steel, gray iron, ductile iron, cast aluminum alloy,

    copper-zinc alloys (brass), copper-tin alloy (bronze), copper, forged steel.

3. Working conditions:
    Circumstance temperature: Operation temperature －20～＋60℃;
    Keeping temperature: -30℃～＋60℃
    Relative humidity ≤ 90%
    The surrounding environment without a strong vibration, strong magnetic field,

     non-corrosive medium and severe dust.

4. Configuration
 1) Host    1 set
 2) Sensor  1 piece
 3) Nylon brush 1 piece
 4) Small support ring 1 piece
 5) Manual book 1 piece
 6) ABS Equipment cabinet