ASTM Tumble Test Steps For Wheeled Toys

It is used for Tipover Test for Large, Bulky Toys—Large, bulky toys shall be tested for impact by tipping over three times

Base price
Description

Description

 

It is used for Tipover Test for Large, Bulky Toys—Large, bulky toys shall be tested for impact by tipping over three times, one of which is in the worst attitude by pushing the sample slowly past its center of balance onto the impact medium described in 8.7.3.

 

Techinal Parameters                                                

 “A”  shall be not less than 3ft (9.4mm)
 “B”  shall be not less than 7in (180mm)
 “C”  shall be not more than 9 in (230mm)


Key Specifications

 Height for step  180mm
 Dimension  1840x914x1080mm
 Steps  6 layers
 Material  wood
 Standard  ASTM F963