EN1400-2 Bite Endurance Jaws For Pacifier Test
According to the requirements of the standard, the sample should be placed at the lower end by hand, the upper end plate should be moved downwards, and finally the pressure should be applied.
Base price
Description
Usage
Need to be installed on the tensile machine.
Product Introduction
According to the requirements of the standard, the sample should be placed at the lower end by hand, the upper end plate should be moved downwards, and finally the pressure should be applied. Because the nipple itself has toughness, the nipple will not loosen when the upper end plate has not been pressed down, and the hand can be removed. , no danger. If necessary, you can buy a needle-nosed pliers and press it to place it.